Everything ElseOffice ProductsCell Phones & ServiceComputer & Video GamesElectronicsAutomotiveHome & GardenVideoHealth & Personal Care
Grill Parts
Home

Home & Garden

Patio & Garden

Outdoor Cooking

Tools & Accessories

Grill Parts

Weber 41429 Rolling Cart for Weber Q and Baby Q Grills

 
 
Weber 41429 Rolling Cart for Weber Q and Baby Q Grills
View larger imageEmail a friend

Alternate Views:

 
 
 
 
 

Weber 41429 Rolling Cart for Weber Q and Baby Q Grills

This ingenious quick folding cart can be used as a grill stand or as a caddy to trasnport the Weber Q gas grill. To use as a caddy, simply fold and place the Weber Q grill on top. Fits Weber Q 100 and Weber Q 200 series, and Weber Char Q grills.

  • Fits Weber Q 100 and Weber Q 200 series, and Weber Char Q grills

  • Makes it easy to transport your Weber Q grill

  • Locks securely to serve as a stationary stand

  • Folds easily for storing in small car trunks and compact areas

  • Great for tailgating

SKU: 

30487

This product is currently out of stock
Product Details:
Product Length: 20.5 inches
Product Width: 6.8 inches
Product Height: 31.3 inches
Product Weight: 15.0 pounds
Package Length: 30.9 inches
Package Width: 20.8 inches
Package Height: 6.3 inches
Package Weight: 14.6 pounds
Average Customer Rating: based on 118 reviews
 
 

Customer Reviews:
Average Customer Review:4.5 ( 118 customer reviews )
Write an online review and share your thoughts with other customers.

Most Helpful Customer Reviews

54 of 55 found the following review helpful:

5This is a MUST Have Item for the Weber Q  Aug 11, 2006
By Morris Booker "Freebird"
I got this stand today for my Weber Q 200.
It's not the stoutest thing you could imagine but it is most sufficient for the job required. Anything more would just get heavier.
Also, the engineering design itself is really quite convenient once you study how to best use it. While it came completely assembled it does have a learning curve.
I spent about thirty minutes trying different approaches to raising and lowering the setup until finally it became a very simple task. Those complaining about not being able to raise the stand w/o taking the grill off are wrong and need to practice a bit more until they discover the trick to it. I can set this up or break it down in about 30 seconds.
I did chose to make one change however. I think someone else mentioned doing the same.
It has a long velcro strap for holding the cart in it's folded position. I instead use the strap to tie down the grill lid to the front of the cart. This makes it one integral unit so that I can raise or lower the whole grill without it becoming detached from the cart.
When upright, make certain to "completely" lock in the wire support to the wheel axle. It not only snaps "over" the axle but also snaps on the "underside" as well.

Steps to how I raise and lower the grill while on the cart.

1. Strap the grill handle to the front of the cart with the velcro strap. IMPORTANT!
2. Release the wire shelf at the bottom from the wheel axle.
3. Lift the wire shelf with your right hand while holding the left side of the grill with your left hand.
4. Pick up on the left side of the grill to take the weight off the leftside legs and at the same time pull up on the wire shelf in your right hand. (This folds the left side legs under the grill.)
5. Put your right foot in front of one of the wheels to keep them from rolling and lean the whole setup over the right side legs while at the same time lowering the unit to the ground and off you go!
VERY SIMPLE TO DO! This is all done in one flowing motion actually and it takes about 15 seconds. But DO NOT forget step one, attaching the grill to the cart with the velcro strap.

To raise simply do the reverse. Start by leaning the grill on its left side and pulling out the wire grill (if you tucked it under). Pull the wheels out to the right. Hold the wire grill in your right hand and pick the grills left side up with your left hand. Push the wire down and the left legs over and snap the wire in the axle. EASY!
It works great like this and I am VERY glad I purchased the cart. I can't imagine being without it!
OH! And does this grill ever do a fine job cooking! It is terrific!
I am very pleased with my setup and have no doubt it will be well worth the investment. I'm sure you will be as well.

34 of 35 found the following review helpful:

5This is a MUST for the Q/Baby Q owners!!!!  Apr 22, 2004
By Emad Y. Allaho "allahoe"
If you have invested in a Q or Baby Q grill, then there is absolutely NO point of NOT buying this cart. I have tried grilling without it (putting the Q on the floor), it was not fun. Besides, it is great to tow the Q with you if you have to walk to your grilling place. Get it, you won't be sorry that you did.

32 of 33 found the following review helpful:

5It's More Than Just A Cart...  Jul 02, 2004

On the surface this looks like any ole cart that you would set your grill on. You may be asking yourself, self, why would I spend $40 on a grill cart when I can just set my grill on top of my folding table? Well here's why. This cart will fit your grill like a glove. Your grill will sit atop this sturdy cart like man on top of his mountain. I also use this cart to hold my big external propane tank (which I have connected to the grill using the optional hose attachment) and a little six pack cooler. This cart also offers you a place to hang your tools. It also folds down into a nice little package complete with velcro for ensuring that it stays folded. All these reasons prove why this is more than just a cart, it is a grilling podium.

14 of 14 found the following review helpful:

4A Must-Have!  Oct 08, 2004
By LuvToysLV "Phyl"
I purchased the Q grill, and debated buying the stand. I am so happy that I did. I have a small outdoor area, and the stand is the perfect grilling height, the Q fits securely in it, and you can reposition the grill in the yard (sun, wind, etc.). It is not bulky or clumsy.

15 of 16 found the following review helpful:

1This is NOT designed for the Baby Q  Jul 15, 2005
By Thomas Ferguson "BBQ Enthusiast"
I have the Weber Baby Q and love the grill. I wanted to add the cart and was please to read that it is for the Q or the Baby Q. WRONG! This cart only works for the Q. It has two little brackets at the back corners that the legs of the Q fit into to hold it in place. Those brackets don't hold the Baby Q legs. They are too wide.

So the Baby Q just sits on top of this thing, doesn't attach like the Q. I called Weber and their Rep actually tried one they had there and she said, "You're right, it doesn't fit." She was going to submit a request to their design dept to look at this as it would be a very minor change to the mold when they make the top part of the stand.

I'm returning mine, but I still love the Baby Q.

UPDATE: Although I cannot change the rating I gave this, I must say that there is a version of this cart that DOES fit the Baby Q. Weber originally had a cart that ONLY fit the Q. That was the one I got, being told it fit both. I now have the updated version of this cart and am very happy with it.

See all 118 customer reviews on Amazon.com
 
 
You may also like ...
Schumacher SEM-1562A 1.5 Amp Speed Charge Maintainer
Schumacher SEM-1562A 1.5 Amp Speed Charge Maintainer
List Price: $59.80
Our Price: $19.00
You Save: $40.80 (68%)
Add to Cart
Schumacher SSC-1500A Ship 'n Shore SpeedCharge Charger with included battery clamps
Schumacher SSC-1500A Ship 'n Shore SpeedCharge Charger with included battery clamps
List Price: $103.30
Our Price: $46.54
You Save: $56.76 (55%)
Add to Cart
DEWALT DC9096-2 18-Volt XRP 2.4 Amp Hour NiCad Pod-Style Battery, 2 Pack
DEWALT DC9096-2 18-Volt XRP 2.4 Amp Hour NiCad Pod-Style Battery, 2 Pack
List Price: $232.44
Our Price: To see price, add to cart.
Add to Cart
 
 
 
 
 
 
Web business powered by Amazon WebStore